The Spacetime Metric
Explore the vacuum chapter

Fields between mirrors

Two conducting mirrors constrain the electromagnetic field between them. Changing their separation changes the attractive force and the work exchanged with the apparatus.

This interactive lesson uses Casimir’s ideal parallel-mirror calculation at zero temperature. The plate area is 1 cm². The drawings expand the nanometre gap so you can inspect it.

Parallel-mirror cavity1 cm² facing area
300 nmCross-section · gap expanded for visibilityGap and thickness enlarged
The section diagram uses the same physical calculations and controls as the 3D view. The visible curves illustrate selected allowed field patterns. They are not particles or a complete vacuum spectrum.
300 nm
100 nm · closer1,500 nm · farther
Attractive pull
16.1 µNtoward the other plate
Interaction energy
−1.61 pJrelative to infinitely separated plates
Pressure magnitude
161 mPaideal, zero-temperature mirrors

Motion is paused to respect your reduced-motion setting.

The surfaces set the boundaries

A conducting surface constrains the electromagnetic field at its face. Changing the spacing changes which normal-mode patterns fit. The plates here are ideal mirrors; their thickness and gap are enlarged so you can see them.

Separation and attraction

Pin a separation, then change the gap. The force grows as 1/d⁴: half the separation gives sixteen times the attraction in this ideal model.

Compared with 300 nm1×the attractive force

Work over a complete cycle

The Casimir force does work as the plates approach; separating them for another stroke requires work in return.

Your stroke: 300 → 300 nm0 fJno displacement, so no mechanical work

Predict the force

At 300 nm, you measure a pull. Move to 150 nm. How much stronger is the ideal attraction?

Force and interaction energy

Attractive force
F=−π2ℏcA240d4F=-\frac{\pi^2\hbar cA}{240d^4}
What this says
Halving the gap d multiplies the attraction by sixteen. A is the facing area, ℏ the reduced Planck constant and c the speed of light. The negative sign points toward a smaller gap.
Interaction energy
U=−π2ℏcA720d3U=-\frac{\pi^2\hbar cA}{720d^3}
What this says
U is the interaction energy relative to infinite separation. Opening the gap raises U, so you supply work. Closing the gap lowers U, so the attraction can do work. A slow, reversible reset costs the same amount.

Parallel-plate measurements

Casimir derived the ideal parallel-plate attraction in 1948. Bressi, Carugno, Onofrio and Ruoso measured the force between parallel conducting surfaces in 2002. Actual materials, temperature, surface roughness and alignment alter the prediction, so an experimental apparatus needs those corrections.

The few field curves here are a teaching picture of allowed normal-mode shapes. They do not count the complete electromagnetic spectrum or measure an absolute vacuum-energy density. Compare the ideal curve with a measured force at the same gap.

Original papers