The Spacetime Metric

Historical research guide · 0013 · 2000

Motionless electromagnetic generator

Stephen L. Patrick · Thomas E. Bearden · James C. Hayes · Kenneth D. Moore · James L. Kenny · Individual

In one minute

US Patent 6,362,718 describes an electrical generator with no moving parts. Thomas Bearden and his four co-inventors — Stephen Patrick, James Hayes, Kenneth Moore and James Kenny — set a neodymium-iron-boron magnet inside a closed core of nanocrystalline alloy that gives the magnet’s flux two paths around the loop. Two small input coils are pulsed alternately, and each pulse pushes back against the flux in its own path, so the magnet’s field is shuttled from one side of the core to the other with nothing turning and without driving the core into saturation. Two output coils take current from the swings. The inventors report bench measurements at eight input voltages from 10 to 75 volts at 87.5 kilohertz, with output power above input power at every point, and extrapolate a coefficient of performance of 3.44 for each output coil at 100 volts in. The patent also specifies a self-running form: a battery starts it, then a sensing circuit feeds the input coils from the device’s own rectified output.

Connection

It is the best-documented hardware claim in the chapter on drawing energy from the vacuum, and its energy accounting — a small switching input steering a much larger standing magnetic flux — is exactly the question the vector-potential chapter asks: where the work comes from when you change the geometry of a field instead of pushing against it.

From the source

  1. A permanent magnet’s flux can be steered between two paths in a closed core by input coils that oppose the flux in their own path, switching the field with no moving parts and without driving the core to saturation.Detailed description, FIG. 1

  2. Nanocrystalline and amorphous magnetic alloys — here a laminated iron-based Metglas 2605SA1 core with a neodymium-iron-boron magnet — switch flux fast enough and with low enough loss to make the architecture practical.Background information, description of the related art

  3. Because the input coils never have to overpower the magnet, the power needed to switch the flux is much smaller than the power the shuttled flux induces in the output coils.Summary of the invention

  4. Measured across eight input voltages from 10 to 75 volts at 87.5 kilohertz, the output power was higher than the input power at every measurement point.Detailed description, FIGS. 7–8

  5. Extrapolated to 100 volts in — 140 milliamps, 14 watts of input — each of the two output coils delivers 48 watts, a coefficient of performance of 3.44 per coil.Detailed description, FIG. 8

  6. After a brief start from a battery, a sensing and switching circuit transfers the drive power to the device’s own rectified output, so the generator runs its input coils from one output coil and a load from the other.Claims 4–5; detailed description, FIG. 1

The way in

https://patents.google.com/patent/US6362718B1/en

How to cite it

Stephen L. Patrick, Thomas E. Bearden, James C. Hayes, Kenneth D. Moore, James L. Kenny, Individual (2000) Motionless electromagnetic generator US6362718B1

Where it sits in the curriculum

Provenance: Retrieved 2026-09-07 · sha256 70f71063e25a

Summary by: The Spacetime Metric editorial rail (AI draft from the source text, 2026-09-07)

← The library