The Spacetime Metric
Abundant-energy scenarios

Cavities and compressed plasma

An optical cavity changes the environment beside an electronic junction; a contracting lithium liner compresses magnetized plasma. Inspect both apparatuses in 3D and compare their measured current and temperatures.

Interactive apparatus

Cavity · junction · circuitSection diagram
Layered optical cavity and electronic junctionA reflector and optical cavity sit above two metal layers separated by a thin insulator. A circuit connects the two metals.ReflectorOptical cavityUpper metalInsulatorLower metalI / V
  • Reflector
  • Optical cavity
  • Upper metal
  • Insulator
  • Lower metal
  • Collection circuit
Schematic geometry; dimensions and diagnostic positions are expanded or simplified. The diagram shares the same lesson and controls.

Cavity and junction

The optical cavity sits above a metal–insulator–metal junction, changing the electromagnetic environment beside it.

Layer separation changes the view only; it does not calculate device output.

Electrical load point

Where between short circuit and open circuit does the load receive the most power?

Current: 80% of short-circuit current. Model load power: 0.896 pW.

Normalized straight-line I–V teaching model, using the paper’s Figure 4 maximum of 1.4 pW. The 33 nm example and the paper’s 107 nm array tests are different datasets.

Current and load power along a linear generator characteristicCurrent falls from one to zero as voltage rises. Load power is zero at both ends and peaks halfway. The current operating voltage is 20 percent of open-circuit voltage.ShortHalf voltageOpen10
Blue: current / short-circuit currentOchre: load power / maximum power

A cavity beside a junction

Moddel and colleagues report electrical current from a metal–insulator–metal junction with an optical cavity on one side and no applied voltage. The experiment links cavity thickness to the current–voltage response. Its companion paper examines conductance: how readily current changes when voltage changes.

The authors propose that the cavity’s optical modes affect the capture of excited electrons. The open questions concern the asymmetry, which carriers reach the terminals, and how materials and geometry change the response.

Smallest cavity in the reported series
33 nm
Maximum power calculated from the I–V line
1.4 pW

The active junction overlap is 0.02 μm², smaller than a complete packaged device. Figure 4, the array measurements and eight control series describe different parts of the experiment.

Read the current experiment

Vacuum-energy chapterCavity field patterns

Heat by compressing the field

The October 2026 LM26 papers describe a magnetized plasma compressed inside an imploding lithium liner. During compression, the experiment measures magnetic flux, temperature and neutron production.

Filtered X-rays: peak electron temperature
1180 ± 65 eV
Thomson scattering: electron temperature
1090 ± 40 eV
Neutron yield: inferred ion temperature
459 ± 33 eV

The observations sample different species and moments in the same shot: the X-ray peak occurs at radial compression 2.75, after the Thomson observation at 2.35.

The ion-temperature interval covers counting statistics at 90% confidence. Fuel dilution, density and plasma-volume assumptions add separate uncertainties; the three error bars describe different measurements.

Read the compression experiment

Fusion chapterThomson diagnostic

Original papers

  1. 2021

    Optical-Cavity-Induced Current

    Garret Moddel, Ayendra Weerakkody, David Doroski and Dylan Bartusiak. Symmetry 13, 517 · 10.3390/sym13030517.

    Electrical current, current–voltage curves, cavity thickness, eight control series and a 4 × 4 array.

  2. 2021

    Casimir-cavity-induced conductance changes

    Garret Moddel, Ayendra Weerakkody, David Doroski and Dylan Bartusiak. Physical Review Research 3, L022007.

    A companion experiment examining how the junction conductance changes with its cavity.

  3. 8 October 2026

    Compressional heating above 1 keV on the LM26 magnetized target fusion machine

    S. J. Howard and colleagues. arXiv:2610.11890v1.

    Magnetic-flux compression, electron heating, ion-temperature inference and neutron production in LM26.

  4. 8 October 2026

    Thomson Scattering Measurement of 1 keV Electron Temperature on Lawson Machine 26

    P. Carle and colleagues. arXiv:2610.11769v1.

    The optical diagnostic, its spatial and temporal sampling, and the measured electron temperature.

  5. 2023

    The SPARC Toroidal Field Model Coil Program

    Zachary S. Hartwig and colleagues. arXiv:2308.12301.

    A large-scale REBCO superconducting magnet reaching 20.1 T peak field on the conductor.

  6. 2012

    Test of zero-point energy emission from gases flowing through Casimir cavities

    Olga Dmitriyeva and Garret Moddel. Physics Procedia 38, 8–17 · 10.1016/j.phpro.2012.08.007.

    The earlier gas-flow experiment: infrared measurements, gas/coating comparisons and the chamber’s radiation balance.